Akubra Overload

[wsmontana]

The “Reily” model must have been a short run as I can’t find any around. With a 2 3/4” brim and a 4” crown (center front) it is basically a compact version of a Snowy River.

 

[RickP]

The “Reily” model must have been a short run as I can’t find any around. With a 2 3/4” brim and a 4” crown (center front) it is basically a compact version of a Snowy River.
View attachment 769137 View attachment 769138 View attachment 769139

Over the years Ive found a few Akubra models through Salvation Army Stores down under, that dont seem to have ever been sold here ( Maybe Australian market only?) Used to get some good prices through them, but the shipping costs recently have really cancelled out any savings on the hats.

 

[wsmontana]

Over the years Ive found a few Akubra models through Salvation Army Stores down under, that dont seem to have ever been sold here ( Maybe Australian market only?) Used to get some good prices through them, but the shipping costs recently have really cancelled out any savings on the hats.

This one was made for the Outback Trading Co.

 

[Zombie_61]

RickP: ...I've got several Stetson Hemp Stratoliners and Open Roads...They have a neat appearance, hold up great to moisture, and come in a bunch of colors...

View attachment 762155

Nice!!! Gently modified Stratoliner?

 

[RickP]

RickP: ...I've got several Stetson Hemp Stratoliners and Open Roads...They have a neat appearance, hold up great to moisture, and come in a bunch of colors...


Nice!!! Gently modified Stratoliner?

That one was scrunched when I got it....Steamed and ironed the brim a bit flatter and worked some creases out. Has amazed me how much steam helps a hemp braid hat

 

[The Lost Cowboy]

Got this email last night from the Hattery (hatsdirect - home of the FED IV) in Katoomba, Aus.

It seems they are doing free global shipping for the rest of the year on orders over $150 US! That is a sweet deal!

I will say once again that I wish they were able to publish the prices on their website. What a hassle! But honestly, this free shipping is so terrific, I will probably make a purchase in the next few months even though I don't really need a new Akubra!

(Note that I can't find where the actual email specifies free global shipping, but the little preview does: )

 

[jeffgarf]

Got this email last night from the Hattery (hatsdirect - home of the FED IV) in Katoomba, Aus.

It seems they are doing free global shipping for the rest of the year on orders over $150 US! That is a sweet deal!

I will say once again that I wish they were able to publish the prices on their website. What a hassle! But honestly, this free shipping is so terrific, I will probably make a purchase in the next few months even though I don't really need a new Akubra!

View attachment 772030

(Note that I can't find where the actual email specifies free global shipping, but the little preview does: )

View attachment 772031

I got that one too and had the exact same reaction. Great minds and all.

 

[The Lost Cowboy]

For anyone wondering. I actually wanted to know the price of the heritage Fed IV, but I am certain this is the price of the Imperial.

 

[DaveProc]

Akubra Adventurer cleaning up after last week's blizzard. At the Gen. Nathanael Greene Homestead National Historic Landmark

 

[M Hatman]

Here is a resent find NOS. I believe is is in "Fawn" another color they no longer offer for the Campdraft. I am not sure though as it is a bit darker than my other one. I took two pictures, the first better detail the second closely shows the true color.

Speaking of colors, Akubra has dropped Black for a color option for the CD (I am glad I finally ordered one last year) and now it appears they are dropping "Bluegrass Green". As I heard this I just ordered another (this is one of my favorite most worn hats, so I wanted a replacement). So what all this means is I guess going forward they will be only offering the CD in 'Sand".........

Anyway here is the 'Fawn?" CD I am wearing today!

 

[Frontporchcharlie]

Here is a resent find NOS. I believe is is in "Fawn" another color they no longer offer for the Campdraft. I am not sure though as it is a bit darker than my other one. I took two pictures, the first better detail the second closely shows the true color.

Speaking of colors, Akubra has dropped Black for a color option for the CD (I am glad I finally ordered one last year) and now it appears they are dropping "Bluegrass Green". As I heard this I just ordered another (this is one of my favorite most worn hats, so I wanted a replacement). So what all this means is I guess going forward they will be only offering the CD in 'Sand".........

Anyway here is the 'Fawn?" CD I am wearing today!
View attachment 777134 View attachment 777135

Bluegrass Green is the best hat color ever, in my opinion. I’m glad I have a few. It’s a shame to see them go.

 

[DamoLynch]

Like the look of this new addition to the Akubra range.

 

[Frunobulax]

Like the look of this new addition to the Akubra range.

View attachment 780021

Smoky Cape sounds like an appetizer at a trendy restaurant.

 

[ShadowXY]

3rd Akubra. The Boss 1096
The bay advertised as a 6 7/8 - 7.
It's bigger likely 7 1/8. or more can't tell.

Width opening is 6.75 in & length is 8 in.
No tag. Came in a Outback box marked in pen 1030 Blle 57

I have 2 Abubra in sz 55. One is on the small side & the Range just right.
Really hoping I can make this hat shrink. They say Akubra's shrink but not this one.

 

[Hurricane Jack]

It's bigger likely 7 1/8. or more can't tell.

Width opening is 6.75 in & length is 8 in.

6.75 + 8 = 14.75/2 = 7.375
Size 7-3/8

 

[ShadowXY]

6.75 + 8 = 14.75/2 = 7.375
Size 7-3/8

Not sure how that is translating into a hat with a 22 in circumference. I was looking at another with those same specified L X W also they say S- M.

Would explain why the hat is so big. I put 3 thin layers of a plastic foam under the band & it works.


Hard getting hats that are not marked but at least the dimensions don't lie if it's shrunk.

Just bought Akubra 4 a Drover 1130 marked 55 in gray so this should fit or be snug. I like a 3 1/2 inch brim & it looks like it has a more oval shape than most round Akubras. It also has a higher crown & it was $40 + $9 shipping. I think the horsetail trim needs to be turned as the point most likely the front. I also like a pinch front... Looking forward to the Drover.

I got 2 compliments on the Boss today!

 

[Hurricane Jack]

Not sure how that is translating into a hat with a 22 in circumference. I was looking at another with those same specified L X W also they say S- M.

Using your inside width & length measurements with an ellipse calculator produces a circumference of 23.23”, which puts the hat @ size 7-3/8.

 

[ShadowXY]

Using your inside width & length measurements with an ellipse calculator produces a circumference of 23.23”, which puts the hat @ size 7-3/8.


View attachment 794624

View attachment 794625

Ouch... I'm a 6 7/8-7 (55 -56) so 7 3/8 is 59 cm or 23 plus inch circumference. I was told it was 22 inch circumference & that's what a quick measure was 22 in. It should be a 7 but I'm torn. V nice hat but I had to do so much padding under the band to make it work.

I'll need to remeasure & get to the bottom of this if not for this hat for future hats.

Thanks.

 

[ShadowXY]

Not sure how that is translating into a hat with a 22 in circumference. I was looking at another with those same specified L X W also they say S- M.

Would explain why the hat is so big. I put 3 thin layers of a plastic foam under the band & it works.


Hard getting hats that are not marked but at least the dimensions don't lie if it's shrunk.

Just bought Akubra 4 a Drover 1130 marked 55 in gray so this should fit or be snug. I like a 3 1/2 inch brim & it looks like it has a more oval shape than most round Akubras. It also has a higher crown & it was $40 + $9 shipping. I think the horsetail trim needs to be turned as the point most likely the front. I also like a pinch front... Looking forward to the Drover.

I got 2 compliments on the Boss today!

I should have checked my hats before I bought another. The Akubra Norman Shark in 55 is small. Fits if I don't bring it down on the front or if I wear it like I like on the brow it's up in the back. Just seems like it's wearing me rather than I'm wearing it.

A Resistol 6 7/8 long oval fits great at 6 1/4 inch wide X 7 3/4 inch long. I guess my head is more oval but certainly not round.

6 3/4 inch wide is too wide. If it was 6 1/2 inch wide which is just right or bit snug X 8 in long then maybe it would be workable.

Darn I like the Boss & now I'm concerned as the Drover is a 55 & I have no idea of it's width & length though
the straw Abubra range in sz 55 fits fine.

 

[ShadowXY]

I should have checked my hats before I bought another. The Akubra Norman Shark in 55 is small. Fits if I don't bring it down on the front or if I wear it like I like on the brow it's up in the back. Just seems like it's wearing me rather than I'm wearing it.

A Resistol 6 7/8 long oval fits great at 6 1/4 inch wide X 7 3/4 inch long. I guess my head is more oval but certainly not round.

6 3/4 inch wide is too wide. If it was 6 1/2 inch wide which is just right or bit snug X 8 in long then maybe it would be workable.

Darn I like the Boss & now I'm concerned as the Drover is a 55 & I have no idea of it's width & length though
the straw Abubra range in sz 55 fits fine.

I thought the 3 layers of thin foam under the band would end up stretch the leather banc so took one out in the hope the hand could shrink.

the foam that goes all around under the leather band measures 23 inches. Seems it is a 23 inch circumference under the leather band so as mentioned the hat is likely a 58mm/ 7 1/4.

Oh well. Guess I could fight to return it on inaccurate sizing. It's a No returns listing but they never gave any L X W.
That really helps...

Seller:
Size: Tag missing — measured directly from interior:
This hat measures ~22” inside circumference, so it fits closest to 6⅞ (6⅞–7 range).
Measure your head and compare before buying...

HMMM

I don't think anyone wants to ship the hat back or pay for it. Came with the original box so a box in a box it must have cost a lot to ship although it was only one state away in AZ. Not sure what to do. The 2 foam layers seems to be molding with the band & head.

I know these hats can shrink & hoping to figure a way. Steam & hot California weather?

The foam thickness is about 1.5mm thick so double is 3mm. Don't have my measure handy. Don't think it's bringing the hat down to a 56- 55 mm

Such a beautiful soft hat in excellent condition with box. I'm trying more steaming to narrow it push the crown down a bit & pinch the front.
Then let time shrink it... The hat looks so good on. The crown is wide enough & the brim ...it's just so nice!